Food grade rtv2 liquid silicone rubber for cake mold

Product Description-Food grade rtv2 liquid silicone rubber for cake moldPourable, addition-curing, two-component silicone rubber that vulcanizes at room temperature. Non-toxic, odorless, two-component

Product Description-

Food grade rtv2 liquid silicone rubber for cake mold

Pourable, addition-curing, two-component silicone rubber that vulcanizes at room temperature. Non-toxic, odorless, two-component liquid silicone rubber, are two-component materials. Resistance high temperature of 250℃.

Features:
•High tear strength
•Food grade silicone(environmental, odorless and nontoxic)
•High resistance to high temperature and aging(resist -60 to 150℃)
•High chemical resistance to aggressive components of some types of resins
•Outstanding resistance to common casting resins

Applications:

Addition silicone rubbers can be applied to Food Grade Silicone: shoe insole, chocolate mold, decorative lace mold, fondant mold, and Medical Grade Silicone: sexy silicone dolls, human mask, prosthetic limbs, sexy penis.
Also can be applied to PU resin casting, general mold making, GRC and concrete molding, superior manual mold design, food grade molding application, rapid prototyping(urethane casting/ silicone tooling/ vacuum casting).


Physical properties of Condensation Cure Mold Making RTV2 Silicone Rubber

Item NO.:
RTV1515
Mix ratio:
1:1
Elongation:
>550%
Color:
Translucent
Tensile strength:
>4.0 Mpa
Pot life time:
30-40 mins
Hardness:
15±2A
Shrinkage:
≤0.1%
Cured time:
6-8 hours
Tear Strenfth:
>30.6 N/mm
Viscosity
6000±2000
Warranty:
12 month
How to make mold


This material can readily accept pigments.Stirring individual components before use is recommended. Make sure to weigh and measure accurately. Close containers tightly after use. Products should be stored in their original, sealed containers in an environment that does not exceed 90℉. Under these conditions, the product will achieve the expected shelf life. 

The following procedure is an example of a 10:1 mix ratio addition cure product. Please refer to the product's technical sheet for mix ratio information:

Mixing: Charge 1 parts by weight of "Part A" and 1 parts by weight of "Part B" into a clean, compatible metal or plastic container. The volume of the container should be 3-4 times the volume of the material to be mixed. This allows for expansion of the siloxane material as it de-gasses.

Mix thoroughly by hand or with mixing equipment while minimizing air entra
pment until a homogeneous mixture is obtained. This will occur when the material takes on a uniform color with no visible striations. Scrape the sides and bottom of the container thoroughly several times while mixing. Once mixing is complete it is recommended that the material be de-aired 2-3 times by intermittent evacuation for a few minutes to minimize any imperfections due to bubbles in the cured material. Typically after releasing the vacuum 2-3 times the mass will collapse on itself at which time the vacuum should be left on only 2-4 minutes longer.

Company Information

Office: Shenzhen Rongxingda Polymer Material Co.,Ltd

ADD: Room 804,Tianfuxing Building,Meilong Road,Longhua New District,ShenZhen,518131,China

Factory: Dongguan Rongxin Silicone Technology Co.,Ltd

ADD: No.16 Building,Tianxin Industrial Zone,Tangxia,Dongguan,523718,China


Established in 1999, Dongguan Rongxin Silicone Technology Co.,Ltd is a manufacturer and trader specialized in polymer material, development and production of silicone rubber.We are located in Tangxia dongguan, with convenient transportation access. And we have set up an office in 2012, Shenzhen Rongxingda Polymer Material Co.,Ltd. Our company main product is soap mold, candle mold, gypsum mold and plaster products, cement, concrete mold, sex doll, human body and so on. It is has pass FDA, MSDS, ROHS, ISO certificates. All of our products comply with international quality standards and are greatly appreciated in variety of different markets through out the world.

package

Liquid silicone rubber package

Packing Details : Packing, solid bicycle saddle, 50pcs/carton



Delivery Details : 3-30 days after order of Solid bicycle tire tubes

Ccertificates

Shenzhen Rongxingda Polymer Material Co.,Ltd

Our well-equipped facilities and excellent quality control throughout all stages of production enables us to guarantee total customer satisfaction. Besides, our platinum cure silicone rubber has pass FDA certifications,  other certificate have SGS, MSDS, ROHS  and so on. As a result of our high quality products and outstanding customer service. If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us. We are looking forward to forming successful business relationships with new clients around the world in the near future.